MUX650 5AX
High Performance Bridge Travelling Machining Center
- MUX 650 5AX bridge travelling 5 AX machining center features the table size Ø650 mm and max. workpiece size Ø700 x 460 mm applicable for complicated contour and high accuracy machining applications.
- Superior machine accuracy and longevity from excellent scrap skill and precision tilt/ rotary table. are applicable to aerospace, medical, mold, automobile and advanced industry.
Five Axes Worm Gear or DDM Tilt/ Rotary Table
- High Precision and efficiency wall mounted Tilt/ Rotary Table.
- Tilt and Rotary Table installed with super precision Heidenhain rotary encoder as standard.
- Tilt and Rotary Worm Table with high speed 25/ 25 rpm for operation efficiency on MUX Series.
- Tilt and Rotary DDM Table with high speed 60/ 100 rpm for operation precision on MUX Series.
- Kinematic calibration software is applied for 5 axes and 5 face for better accuracy.
- Simultaneous five axis operation feature with five axis correction tips, high precision contouring capability, tool tip control TCP and TCPM.
- Simultaneous four axes and 1 fixed axis for flexible machining application with cost efficiency.
5AX Machining Center for MEDIUM/ LARGE PARTS
Available for MUX 5AX / MUX 5F or Hybrid Series are installed with Fanuc 31iB5 Plus / Fanuc 0iMF Plus or MUX 5AX / MUX 5F Heidenhain TNC640 / Heidenhain TNC620
STANDARD FEATURES
MUX650 5AX, 5 Axes Simultaneous Control Machining Center, Bridge Travelling Type
Fanuc 31iB5 15″ TFT Color Monitor,
Dynamic Collision Monitoring and Checking Software
Tool Center Point Control, Workpiece Setting Error Compensation
Rotary Table Diameter Ø650×520 mm (Ø25.59” x 20.47”)
Max Work Size Ø690 mm (21.17”) Height 460 mm (18.11”)
Max Table Load 300kg/ 300kg (661.39 lbs./ 661.39 lbs.)(Horizontal/ Tiling)
X/ Y/ Z Axis Travel 700/ 560/ 475mm (27.56”/ 22.05”/ 18.70”)
Tilt Axis (B Axis), Swiveling Range -90~ +120°; with Heidenhain ECN Rotary Encoder,
Max 25rpm; Clamping Torque 3400Nm
Rotary Axis (C Axis) 360°; with Heidenhain ECN Rotary Encoder,
Max 25rpm; Clamping Torque 2000 Nm (449.62 lbs.)
Max Spindle Power 33 kW (44.25 hp), 166Nm (122,43 ft-lb), S6-15%
Max Spindle Speed 15,000rpm, DDS, Big Plus #40, Grease Lubrication, Spindle Oil Chiller
Fanuc α Spindle Motor, Fanuc α Amplifiers and α Servo Motors with Absolute Positioning Encoder
X/ Y/ Z/ B/ C Servo Motors a22/ a22/ a22/ a40/ a12; 4/ 4/ 4/ 9/ 3kW (5.36/ 5.36/ 5.36/ 12.07/ 4.02 hp)
C2 Class Accuracy Ballscrew and Precision Roller Linear Guide;
X/ Y/ Z Axis Rapid 36/ 36 / 36 m/min (1417/ 1417/ 1417 ipm)
Side Mount Swing Arm Type ATC 30 Tool Pockets,
Max Tool Dia. Ø75/125mm, Tool Length 250mm, Tool Weight 8kg
Smart rigid Tapping
Automatic Centralized Lubrication System
Air Purge/ Air Sealed for Spindle Protection
Spindle Oil Chiller
Spindle Air Purge
Fully Enclosed Protection
Multi Layers Safety Vision Panels EN12417
Portable MPG
Coolant Pumps, Two Pumps, Spindle Ring Flushing Pump and Side Flushing Pump
Heat Exchanger
Coolant Tank 500L (132 Gallons)
Air Gun and Washing Gun
Chip Flush System
Cutter Air Blast and Coolant Flush Beside Spindle
Spindle Circular Coolant Flushing
Auto Power Off M30 (M80)
Hand Tool Kit
30 pieces Pull stub
LED Work Light
Three Status Indicator Light
| Product | Unit | MUX650 5AX | |
|---|---|---|---|
| Travel | X axis travel | mm | 700 (27.56) |
| Y axis travel | mm | 560 (22.05) | |
| Z axis travel | mm | 475 (18.70) | |
| Tilt axis Swiveling Range | -90° ~ +120° | ||
| Rotary axis Travel (C axis) | 360° | ||
| Spindle Nose to A axis Center | mm (inch) | 150 - 625 ( 5.91- 24.61) | |
| Spindle Center to Column | mm (inch) | 275 (10.83) | |
| Table | Table Area | mm (inch) | Ø650 x 520 (25.59 x 20.47) |
| Max. Work Piece Size | mm (inch) | Ø690 x 460 (27.17 x 18.11) | |
| Table load capacity | kg (lb.) | 300 kg (661.39) (Horizontal) / 300 kg (661.39) (Vertical) | |
| T-Slot (Number x Width x Pitch) | mm (inch) | 5 x 18 x 100 (5 x 0.71 x 3.94) | |
| Spindle | Spindle Taper | Dual Face #40 | |
| Spindle Speed | rpm | 15,000/15,000/20,000 | |
| Spindle Motor (S3 15%) | kW (hp) | 33 (44.3) / 37(49.6) / 30 (40.2) | |
| Spindle Torque (S3 15%) | Nm (ft/lb.) | 166 (122.44) / 249 (183.65) / 146 (17.68) | |
| Transmission | Direct Driven / Direct Coupling | ||
| Spindle Lubrication | Grease / Grease / Oil Air | ||
| Spindle Cooling | Chilled Oil / Chiller Oil | ||
| Spindle Nose | Short Type for Rigidity | ||
| Spindle Stiffness | Kgf /um | 15 | |
| Spindle Retention Knob Force | N / Kg f | 9,800 /1,000 | |
| Spindle Run Out @Nose | mm (inch) | 0.0015 (0.00006) | |
| Spindle Run Out @300mm | mm (inch) | 0.006 (0.00024) | |
| Feed rate | X-axis rapid traverse | m/min | 36 |
| Y-axis rapid traverse | m/min | 36 | |
| Z-axis rapid traverse | m/min | 36 | |
| Max Acceleration X/Y/Z | G | 0.4/ 0.4/ 0.7 | |
| Cutting Feedrate | mm/min (ipm) | 1 -10,000 (0.04 - 394) | |
| Transmission | Direct | ||
| Axial Motor (X Axis) | kW / HP | 4.0 (5.36) | |
| Axial Motor (Y Axis) | kW / HP | 4.0 (5.36) | |
| Axial Motor (Z Axis) | kW / HP | 4.0 (5.36) | |
| Axial Motor (A Axis) | kW / HP | 9.0 (12.07) | |
| Axial Motor (C Axis) | kW / HP | 3.0 (4.02) | |
| Ball Screw Diameter / Pitch | mm (inch) | 45 / 12 (1.77/ 0.47) | |
| Positioning Accuracy* | mm (inch) | 0.01 (0.0004) / 0.007 (0.00027) / 0.005 (0.0002) | |
| Repeatability Accuracy* | mm (inch) | 0.005 (0.0002) / 0.005 (0.0002) / 0.004 (0.00016) | |
| Tools | ATC Type | Arm type (OPT Chain Type) | |
| Tool Capacity | 30 (OPT 48, 60, 90, 120) | ||
| Max. Tool Diameter | mm (inch) | 75(2.95) | |
| Without Adjacent Tool | mm (inch) | 125 (4.92) | |
| Max. Tool Length | mm (inch) | 250 (9.84) | |
| Max. Tool Weight | kg (lb.) | 8 (17.64) | |
| Chip to Chip Time | sec | 4.5 for 30T / 6.5 for 48T | |
| Method of Tool Selection | Random - Shortest Path | ||
| SPECIFICATIONS | 5F E / 5AX P / 5AX M | ||
| Other | Guide Ways | ||
| Type (All Axes) | Roller Linear Guide Ways | ||
| Way Size (X axis) | mm (inch) | 45 (1.77) | |
| Way Size (Y axis) | mm (inch) | 45 (1.77) | |
| Way Size (Z axis) | mm (inch) | 45 (1.77) | |
| Blocks on Guide Ways (X/Y/Z) | 6 / 4 / 4 | ||
| Axial Thrust Force (X Axis) | N | 11,519 (2,589.57) | |
| Axial Thrust Force (Y Axis) | N | 11,519 (2,589.57) | |
| Axial Thrust Force (Z Axis) | N | 11,519 (2,589.57) | |
| Coolant System | |||
| Coolant Tank Capacity | L (gal) | 500 (132) | |
| Nozzle Coolant & Flush Pump | Bar (psi) | 3.5 (50.76) | |
| General | |||
| Machine Size | mm (inch) | W: 3,178 (125.12) x D: 4612 (181.58) | |
| Height | mm (inch) | 3,040 (119.68) | |
| Weight | kg (lb.) | 8,600 (18,960) | |
| Power Requirements | |||
| Electrical | 380V / 60 Hz | 3 Phase / 45KVA | |
| Air | 5.5 CFM @ 100 psi |
Reviews
There are no reviews yet.